Search this site
Home‎ > ‎

Hardware

Overview

The first parts that were manufactured were the ejection seat and the 2 pedestals. The seat currently is an Aces-II since it was built from a plan found on the Internet. The real PC-9M uses a Martin Baker 11C seat.  At the time I did not have photos of the MB11C. The seat will be modified.


 

Components

The following components will be build: 
Showing 12 items
SectionPurposeProgressLink
Sort 
 
Sort 
 
Sort 
 
Sort 
 
Ejection Seat Seat for pilot (No ejection allowed.)  80%  
Flap position lever Enable the pilot to select a flap setting. 5% / 
Floor Base to support the pedestals and ejection seat as well as other components. 50% Floor 
HUD Glasses Head Up Display (HUD) 0%  
Left Pedestal Host Switches,Environment Panel,Oxygen panel etc. 70% Link to Pedestals 
Left Side Flight Panel Gear Lever and Indicators, Emergency Gear Lever 33%  
Main Flight Controls Make the flight control movable in 2 axis. 70% Link to Flight Controls 
Main Flight Panel Hosts Rimary and Secondary Flight Displays, Radio,GPS and Engine Instruments. 50% Link to Main Flight Panel 
Power Control Lever (PCL) Lever to adjust the power of the engine. (Throttle) 80% Power Control Lever (PCL) 
Right Pedestal Host Switches,PCL,Flap Lever,Trim Indicators etc. 80% Link to Pedestals 
Right Side Flight Panel ELT, Annunciators 0%  
Rudder Pedals and Housing Holds the rudder pedals and provide brake movent on each pedal. 80% Rudder 
Showing 12 items

Sign in|Recent Site Activity|Report Abuse|Print Page|Remove Access|Powered By Google Sites